TL60 2200 840 110-240 M25 GL

The innovative LED outdoor lighting fixtures are applicable for a wide range of different areas, e.g. workshops, engine rooms, stores, passage ways etc. They are designed to meet maritime requirements and to save energie and maintanance cost due to extream long lifetime.

Product sheet

Vare Nr. TL60404002

Technical outdoor LED luminaire, in Aluminium seawater resistant, impact classification IK10, IP66/67 , Lumen Output: 2221, ballast type HF (High frequency), End brackets, stainless steel, cable entry 2xM25-Polyamide, with light source type CRI>80, 4000K, optic type OP = Opal, with Polycarbonate diffusor.

Technical data
IP Classification66/67
IK Classification10
Minimum ambient temperature (ºC)-35
Maximum ambient temperature (°C)55
Net weight (kg)3,8
Gross weight (kg):4.4
Length (mm)724
Width (mm)173
Height (mm)78
Body materialAluminium seawater resistant
Colour of bodySilver
Material end cap:Polycarbonate
OpticOP = Opal
Material of diffuserPolycarbonate
Material of reflector:Aluminium
Colour of reflector:White
Lightdistribution Up/Down3/97
Electrical data
Minimum Voltage -10% (V)110
Maximum voltage +10% (V)240
Minimum frequency -5% (Hz)50
Maximum frequency +5% (Hz)60
Total consumption (W)25
Power factor:0,92
Number of fixtures on a MCB10 type B fuse10
Number of fixtures on a MCB10 type C fuse16
Number of fixtures on a MCB16 type B fuse17
Number of fixtures on a MCB16 type C fuse26
Electromagnetic compatibility:EMC1
Type of ballast/driverHF (High frequency)
Number of ballast/driver1
Light data
Light sourceLED White
Nominal lumen value (lm)2200
Lamp code supplied light sourceCRI>80, 4000K
System Lumen Out2221
System Lumen/Watt89
Rated system lifetime at Ta 45°C100.000h
Type of cable glandM25-Polyamide
Number of cable glands2
Minimum cable diameter7
Maximum cable diameter17
Termination3 pole double push in terminal
Type of blind-plugM25-Polyamide
Number of blind plugs2
Ready for mоuntingEnd brackets, stainless steel
Minimum core diameter0,5
Maximum core diameter6
RemarksCable entry:2xM25x1.5 polyamide D9-17mm (included reduction sealing insert D7-12mm) + Blind plugs:2xM25x1.5 polyamide With end cap and connection box Polycarbonate/white.